Maintenance tips for automatic quantitative fuel dispenser How to keep your gas station in good condition?
Publish Time: 2024-12-02
As the core equipment of gas stations, the performance and status of automatic quantitative fuel dispenser directly affect the refueling efficiency and customer satisfaction. In order to ensure the long-term stable operation of the gas station and extend its service life, regular maintenance and maintenance are essential.1. Daily cleaning and maintenanceRegular cleaning: The external and internal parts of the automatic quantitative fuel dispenser should be cleaned regularly. Use a soft dry cloth or special cleaning agent to remove oil and dust from the external surface. Internal parts, such as oil pumps, flow meters, sensors, etc., should also be cleaned regularly to ensure that there is no accumulation of impurities and oil stains.Filter cleaning: The filter of the gas station is an important part to prevent impurities from entering the oil pump and flow meter. Check and clean the filter regularly to ensure that it is unobstructed. If the filter is damaged or seriously blocked, it should be replaced in time.Seal inspection: The seals of the automatic quantitative fuel dispenser, such as sealing rings and gaskets, should be checked regularly to ensure that they are intact. Aging and wear of seals can lead to oil leakage and performance degradation, so they need to be replaced in time.2. Lubrication and maintenanceLubricant addition: The moving parts of the automatic quantitative fuel dispenser, such as the oil pump and motor, need to be lubricated regularly. The selection of lubricants should comply with the recommended standards of the fuel dispenser manufacturer to ensure the cleanliness and lubrication effect of the oil.Fuel pump maintenance: The oil pump is the core component of the fuel dispenser, and its performance directly affects the efficiency and accuracy of fueling. Regularly check the working status of the fuel pump to ensure that it has no abnormal noise and vibration. If the fuel pump is found to be worn or faulty, it should be repaired or replaced in time.Motor maintenance: The motor of the fuel dispenser also needs regular maintenance. Check the insulation status and wiring terminals of the motor to ensure that it is not loose and corroded. Clean the heat sink of the motor regularly to prevent overheating and failure.3. Performance testing and calibrationFlowmeter calibration: The flowmeter is a key component to ensure accurate metering of the fuel dispenser. Calibrate the flowmeter regularly to ensure that its readings are consistent with the actual amount of fuel. Calibration should use standard metering equipment and record the calibration results for subsequent reference.Sensor detection: The working status and accuracy of the fuel dispenser's sensors, such as liquid level sensors and temperature sensors, should be checked regularly. Use special testing equipment to ensure that the sensor readings are accurate.Safety valve inspection: The safety valve is an important component to prevent the fuel dispenser from overpressure and protect the equipment. Regularly check the working status of the safety valve to ensure that it can be opened in time when the pressure exceeds the set value to prevent equipment damage and accidents.4. Electrical system maintenancePower supply inspection: Regularly check the power supply line and wiring terminals of the fuel dispenser to ensure that they are not loose, aging, and corroded. Use a multimeter to detect the power supply voltage and current to ensure that they meet the rated requirements of the fuel dispenser.Control panel maintenance: The fuel dispenser's control panel is an important interface for operating and monitoring the fueling process. Regularly check the buttons and display of the control panel to ensure that they function properly. If a fault is found, it should be repaired or replaced in time.Grounding protection: The grounding system of the fuel dispenser should be checked regularly to ensure that it is intact. A good grounding system can prevent static electricity accumulation and electrical failures, and ensure the safety of equipment and operators.5. Environmental management and protectionMoisture and dustproof: The fuel dispenser should be installed in a dry and well-ventilated environment to prevent moisture and dust from affecting the equipment. Regularly check the housing and seals of the fuel dispenser to ensure that there is no water seepage and dust accumulation.Anti-corrosion treatment: For fuel dispensers installed in humid or salty environments, anti-corrosion treatment should be carried out regularly. Use anti-corrosion paint or rust inhibitor to protect the equipment from corrosion and rust.Lightning protection: The electrical system of the fuel dispenser should be equipped with lightning protection devices to prevent lightning damage to the equipment. Regularly check the working status of the lightning protection device to ensure that it can effectively protect the equipment in thunder and lightning weather.The maintenance and maintenance of automatic quantitative fuel dispenser is the key to ensure its long-term stable operation and extend its service life. Through comprehensive maintenance measures such as daily cleaning and maintenance, lubrication and maintenance, performance testing and calibration, electrical system maintenance, and environmental management and protection, the fuel dispenser can always be kept in good condition, improving refueling efficiency and customer satisfaction.
